- Видео 186
- Просмотров 1 273 950
Amada UK LTD
Великобритания
Добавлен 25 янв 2012
For more than 50 years Amada has been at the forefront of the fabrication industry, providing machine tools that set the standard for performance and reliability.
The Amada Group is now an international market leading manufacturer, providing a complete solution of machines, tools, software, service, parts and finance for our customers.
Amada UK Ltd was established over 40 years ago and has grown along with our customers to now provide the largest service and sales support network within the UK sheet metal industry. Our Midlands based Technical Centre is specifically designed for machinery demonstrations, showcasing the latest technology in lasers, punches, press brakes, tooling, automation and CADCAM software.
The Amada Group is now an international market leading manufacturer, providing a complete solution of machines, tools, software, service, parts and finance for our customers.
Amada UK Ltd was established over 40 years ago and has grown along with our customers to now provide the largest service and sales support network within the UK sheet metal industry. Our Midlands based Technical Centre is specifically designed for machinery demonstrations, showcasing the latest technology in lasers, punches, press brakes, tooling, automation and CADCAM software.
Amada Endless Burring Tool
Using the Amada Endless Burring Tool on your turret punch press, add a continuous flange to internal apertures or external flanges on your parts for safety, strength & rigidity.
For further information please contact: 01562 749 761 tooling.info@amada.co.uk
For further information please contact: 01562 749 761 tooling.info@amada.co.uk
Просмотров: 232
Видео
Amada Slat Cleaner
Просмотров 614Месяц назад
Amada's Slat Cleaner can help remove dross from slats, quickly and effectively.
AMADA - ATC Range
Просмотров 3822 месяца назад
Do you struggle with long lead times, finding skilled operators and increasing productivity? If so, look no further, AMADA has risen to all these challenges with an innovative range of bending machines, equipped with the Automatic Tool Changer (ATC). Within Europe alone over 500 units have been installed, bringing easy to use advanced technology to many manufacturing sites. To learn more about ...
AMADA - U-Bending Tool
Просмотров 4862 месяца назад
Small bespoke close return bends, traditionally impossible on a standard pressbrake, are possible using AMADA Special U-Bend Tool. Watch our solution here, innovative tooling at its best. For further information please contact: 01562 749 761 tooling.info@amada.co.uk #ukmfg #uksheetmetal #amadauk #tooling #pressbrake #bending #solutions #innovation
AMADA - Marking Pen Tool
Просмотров 1682 месяца назад
Do you want to 'in-process' mark your parts? This indelible pen tool can be used on any Amada turret punch press with ram down hold capability. Innovative tooling at its best. For further information please contact: 01562 749 761 or info.tooling@amada.co.uk
AMADA Automatic Tool Changer Efficiency
Просмотров 2252 месяца назад
Do you know the difference an Automatic Tool Changer (ATC) can make to your production? As you progress through the press brake range, the advantages of each technology boost your output, with the added help of ATC efficiency. The ATC range is the perfect solution to increase your productivity, reduce operator input and maximise processing time. Take your first step into automated bending effic...
AMADA - Hinge Tool
Просмотров 3022 месяца назад
This 2 stage pressbrake tool allows you to complete a hinge profile in one set up. Innovative tooling at its best. 🌟 For further information please contact: 01562 749 761 tooling.info@amada.co.uk
Amada June Exhibition 2024
Просмотров 3182 месяца назад
Join us from the 11th-14th of June for a demonstration on AMADA's latest welding machine, the FLW-Le compact fibre laser welder. Visit our website for more information: www.amada.eu/uk-en/more/eventsexhibitions/events-archive/amada-june-exhibition-2024/
AMADA - Continuous Louvre Tool
Просмотров 2522 месяца назад
Need a long continuous louvre? By pre-piercing using a laser on the open side of the louvre, this tool rapidly forms parallel louvres compared with single hit tools. Innovative tooling at its best. Contact us on 01562 749 761 or tooling.info@amada.co.uk for more information.
AMADA - Rib Tool Heavy Duty
Просмотров 3833 месяца назад
Using the Amada Rib Tool, create triangular strengthening ribs on your pressbrake (Birdbeak rib). Aimed at heavier materials this innovative tool is used as a second operation, after the bending.
AMADA - High Height Emboss Tool
Просмотров 4423 месяца назад
AMADA Tool in Focus: High Height Emboss Tool. An Upform Round Emboss form tool where the cam type die can raise the form higher than a conventional form tool whilst maintaining a lower overall die height to help reduce sheet distortion. Innovative tooling at its best. Contact us on: 01562 749 761 or tooling.info@amada.co.uk to learn more about Amada's tooling solutions.
The Engineering AMADA 2024
Просмотров 1,3 тыс.3 месяца назад
Established in 1946 in Japan by Isamu Amada, the Group now has some 90 companies including sales branches, production sites and investees, and over 8,000 employees worldwide. AMADA offers a fully-comprehensive range of solutions for sheet metal processing, and to promptly meet the changing needs of the market and its customers, the Group has set up a network of production poles in strategic are...
AMADA - Long Board Punch Tool
Просмотров 2763 месяца назад
Looking for the impossible solution? Deep Narrow Channels are easily achievable with the Amada Long Board Punch. Components up to 250mm long with channel widths down to 15mm are possible. Innovative tooling at its best. ️ Contact us on tooling.info@amada.co.uk or on 01562 749 761 to learn more. #amadauk #ukmfg #tooling #uksheetmetal #fabrication #bending #punch #solutions
AMADA - P&F Bridge Tool
Просмотров 3624 месяца назад
Did you know that Amada EM series punching machines are fitted with P&F, have high forming functionality - up to 22mm? Innovative tooling at its best. ️ Contact us on tooling.info@amada.co.uk or on 01562 749 761 to learn more.
AMADA Rememberance Display - Shell Corner, Halesowen
Просмотров 4029 месяцев назад
AMADA Rememberance Display - Shell Corner, Halesowen
ENSIS-AJ 3kW - Productivity NOT Power
Просмотров 1,8 тыс.10 месяцев назад
ENSIS-AJ 3kW - Productivity NOT Power
AMADA UK - Complete Engineering Exhibition 2023
Просмотров 74311 месяцев назад
AMADA UK - Complete Engineering Exhibition 2023
AMADA RMP-PR Automated Solution for Combination Machines
Просмотров 3,9 тыс.Год назад
AMADA RMP-PR Automated Solution for Combination Machines
AMADA In Vision Series: HG-Rm Automated Bending Machine
Просмотров 4 тыс.Год назад
AMADA In Vision Series: HG-Rm Automated Bending Machine
First laser we ever had was LC1212 a workhorse for many years.
I operat AE2510Nt machine
Amada
Excellent tool! Is this a P&F tool where there is a ram the pushes from the bottom? What size stations are you limited to getting this tool in?
Hi Brad, this is a Cam Die and not a P&F tool. Each tool is designed and manufactured uniquely to suit the customer's application, so there is quite a lot of flexibility in size. If you want to inquire further, feel free to contact us on info@amada.co.uk
Amazing innovation.
Send your contact no
Hello, what is the distance between the first and second bend to make a correct metal hinge?
So we have been cutting with this laser for almost 2 years now and all of a sudden the burr on the 316 cold rolled is terrible, even with all the normal things checked and replaced. Nozzle, lenses etc. Even back at start-up default cut conditions and not helping. Anyone have any ideas?
Hi Kristel, can you tell us which company / location you're based at, then we can get one of our consultants to recommend some options for you.
Nozzle center, contaminated gas? 3/16 needs Oxygen gas, not nitrogen. 3/16 is pretty thick. How many Watts is your laser, anything below 2k you will need oxygen.
donnez moi fiche techniquen cet machine svp
Expensive, but most definitely good for 24-7 operation.
🎉🎉🎉🎉
Steve Basford, my old boss
Доброго времени суток. Какая его цена?
Пожалуйста свяжитесь: Telephone: +49 8709 2689 500 Fax: +49 8709 2689 644 E-mail: info@amada.de
Fantastic!
Amada makes great equipment. There are probably more than twenty thousand Amada CNC machines in the U.S. Sadly, the United States has fallen way behind in advanced fabrication. There’s no reason to build factory equipment when there aren’t any factories. This failure to maintain a healthy industrial base will lead to other failures. The economy, the schools; society itself. Eventually everyone will reduced to begging for food, and then they’ll bless the government for being so generous.
❤❤❤❤❤
How to cutter balance parameters 🤔
Promo>SM
この設備でおいくら？
Amada Arcade 212
This is very cool! Hopefully we can get it in the states. I'm adding this to my wish list.
アマダさん 最高
❤❤❤
Wow😮😊🎉🎉🎉🎉🎉🎉🎉🎉🎉
Hai🎉antonmursid🙏✌
Nice
Nice
素晴らしい
I've done a couple, they're a good little thing to make.
《¿》
❤
❤
👍⚡️👍⚡️👍⚡️👍⚡️👍⚡️👍🍾🧲🥂🤝
I have a question when cut a material thicker hole and cutting edge not parallel top surface is bigger than burr surface
Id like this machine💕💕💕
Good
First like♥️
I operate this
How long does the laser stand still while sorting sheets ?
This looks cool
My first Amada was Octo 334 with AutoIndex
Love you Amada